Guide · HUDSON OAK

What Is a Wear Layer? Engineered Wood Flooring Explained

The wear layer is the real wood you see and walk on. Its thickness tells you how the floor can be cared for over its life.

Natural oak flooring — illustrative visualization

The wear layer, defined

On engineered wood flooring, the wear layer is the top layer of genuine hardwood, measured in millimeters. Everything you see — grain, color, texture — comes from this layer. Beneath it is an engineered core that provides stability.

Why thickness matters

Thickness mainly determines whether, and how often, the wood surface can be sanded and refinished. As a general rule of thumb — always confirm with the manufacturer and an experienced installer:

  • Under about 2 mm: the wood is not intended for full sanding. The floor is cared for through cleaning and maintenance of its protective finish.
  • Around 2–3 mm: often allows a light professional sanding and refinish.
  • 4 mm and above: may allow more than one full refinish over the life of the floor.

Wear layers on vinyl are different

Luxury vinyl plank also has a "wear layer," but it is a clear plastic film over a printed image, usually measured in mil (1 mil = 0.0254 mm). A 20 mil vinyl wear layer is about 0.5 mm of plastic — a different material doing a different job — so the numbers are not directly comparable with a wood wear layer.

The HUDSON OAK range

ConstructionWood layerWhat it meansRange
Performance0.6 mm oak or walnutReal wood surface, protected and maintained rather than sandedCollection
Signature2.5 mm oakA thicker natural oak surfaceComing next
Reserve4 mm oakThe most substantial oak surface in the rangeComing next

See the Performance Collection for confirmed details.